-
-
MK2Clone r2 is a successor to MK2Clone r1, which was made just to try if a clone of the Original Prusa i3 MK2 will print properly
-
You need to cut the frame from 10mm plywood, lasercut is recommended
-
You have to collect all the needed parts by yourself, according to Bill of Materials for MK2Clone r2
-
Bill of materials can be found on GitHub: https://github.com/q3ok/Prusa-i3-MK2-Clo...
-
-
-
To be able to build this printer, you need to have your own set of tools
-
Soldering iron
-
Set of screwdrivers
-
Small pliers
-
2x 13/17mm spanners
-
Scissors
-
Fridge with few of your favourite beverages is strongly recommended
-
-
-
If you will find anything wrong in this manual, or you will find a easier way to assembly the parts, feel free to write!
-
-
Almost done!
Finish Line